Â鶹´«Ã½

  | Catalogues for 2003/04 | PG index for 2003/04
 

 

Postgraduate Programme Structures for 2003/04

Department of Mechanical Engineering

TEME-AFL09: PG Dip Power Transmission and Motion Control Systems

Mode of attendance: Full time


There may be some restrictions on, or alterations to, the availability of optional units (refer to timetable)

Year 1, Semester 1

Mandatory units
ME50145 Introduction to hydraulic circuits & components 6 Credits
ME50147 Component selection for hydraulic systems 6 Credits
ME50201 Electromechanical energy conversion 6 Credits
Optional Units: Select 2 Unit(s) from the following list:
ME50148 Hydraulic systems design 6 Credits
ME50150 Introduction to control for electrohydraulic systems 6 Credits
ME50151 Control systems 6 Credits
MN50170 Accounting & finance 6 Credits
MN50173 Strategic information systems 6 Credits

Year 1, Semester 2

Mandatory units
ME50208 Power transmission systems 6 Credits
ME50216 Diploma project 12 Credits
Optional Units: Select 2 Unit(s) from the following list:
ME50173 Â鶹´«Ã½ methodology 6 Credits
ME50194 Practical instrumentation techniques 6 Credits
ME50202 Servo-electric drive performance & control 6 Credits

TEME-AFL10: PG Dip Fluid Power Systems

Mode of attendance: Full time


Year 1, Semester 1

Mandatory units
ME50145 Introduction to hydraulic circuits & components 6 Credits
ME50147 Component selection for hydraulic systems 6 Credits
ME50148 Hydraulic systems design 6 Credits
ME50150 Introduction to control for electrohydraulic systems 6 Credits
ME50151 Control systems 6 Credits

Year 1, Semester 2

Mandatory units
ME50173 Â鶹´«Ã½ methodology 6 Credits
ME50194 Practical instrumentation techniques 6 Credits
ME50208 Power transmission systems 6 Credits
ME50216 Diploma project 12 Credits

TEME-AFM01: MSc Dynamics and Control

Mode of attendance: Full time


There may be some restrictions on, or alterations to, the availability of optional units (refer to timetable)

Year 1, Semester 1

Mandatory units
ME50151 Control systems 6 Credits
ME50155 Mechanical vibrations & noise 6 Credits
ME50190 Systems modelling & simulation 6 Credits
Optional Units: Select between 1 and 2 Unit(s) from the following list:
ME50152 Structural mechanics 6 Credits
ME50178 Advanced control 6 Credits
ME50183 Finite element analysis 6 Credits
Optional Units: Select between 0 and 1 Unit(s) from the following list:
ME50181 Computational fluid dynamics 6 Credits
ME50193 Vehicle dynamics 6 Credits

Year 1, Semester 2

Mandatory units
ME50173 Â鶹´«Ã½ methodology 6 Credits
ME50176 Project scoping 12 Credits
ME50194 Practical instrumentation techniques 6 Credits
ME50208 Power transmission systems 6 Credits

Year 1, Dissertation period

Mandatory units
ME50185 Dissertation 30 Credits

TEME-AFM02: MSc Fluid Power Systems

Mode of attendance: Full time


Year 1, Semester 1

Mandatory units
ME50145 Introduction to hydraulic circuits & components 6 Credits
ME50147 Component selection for hydraulic systems 6 Credits
ME50148 Hydraulic systems design 6 Credits
ME50150 Introduction to control for electrohydraulic systems 6 Credits
ME50151 Control systems 6 Credits

Year 1, Semester 2

Mandatory units
ME50173 Â鶹´«Ã½ methodology 6 Credits
ME50176 Project scoping 12 Credits
ME50194 Practical instrumentation techniques 6 Credits
ME50208 Power transmission systems 6 Credits

Year 1, Dissertation period

Mandatory units
ME50185 Dissertation 30 Credits

TEME-AFM04: MSc Aerospace Engineering

Mode of attendance: Full time


Year 1, Semester 1

Mandatory units
ME50154 Aerodynamics 6 Credits
ME50225 Aircraft performance & design 6 Credits
Optional Units: Select between 0 and 1 Unit(s) from the following list:
ME50151 Control systems 6 Credits
ME50187 Heat transfer 6 Credits
Optional Units: Select between 0 and 1 Unit(s) from the following list:
ME50153 Thermofluid systems 6 Credits
ME50183 Finite element analysis 6 Credits
ME50224 Aircraft propulsion 6 Credits
Optional Units: Select between 0 and 1 Unit(s) from the following list:
ME50166 Aircraft stability & control 6 Credits
ME50192 Turbomachinery 6 Credits
Optional Units: Select between 0 and 3 Unit(s) from the following list:
EG30061 Aerospace Materials 6 Credits
ME50169 Aerospace structures & aeroelasticity 6 Credits
ME50181 Computational fluid dynamics 6 Credits

Year 1, Semester 2

Mandatory units
ME50173 Â鶹´«Ã½ methodology 6 Credits
ME50176 Project scoping 12 Credits
ME50194 Practical instrumentation techniques 6 Credits
ME50208 Power transmission systems 6 Credits

Year 1, Dissertation period

Mandatory units
ME50185 Dissertation 30 Credits

TEME-AFM05: MSc Automotive Engineering

Mode of attendance: Full time


There may be some restrictions on, or alterations to, the availability of optional units (refer to timetable)

Year 1, Semester 1

Mandatory units
ME50161 Internal combustion engine technology 6 Credits
ME50223 Vehicle Engineering 6 Credits
Optional Units: Select between 0 and 1 Unit(s) from the following list:
ME50151 Control systems 6 Credits
ME50187 Heat transfer 6 Credits
Optional Units: Select between 2 and 3 Unit(s) from the following list:
ME50155 Mechanical vibrations & noise 6 Credits
ME50183 Finite element analysis 6 Credits
ME50190 Systems modelling & simulation 6 Credits
ME50193 Vehicle dynamics 6 Credits
ME50206 Energy & the environment 6 Credits

Year 1, Semester 2

Mandatory units
ME50173 Â鶹´«Ã½ methodology 6 Credits
ME50176 Project scoping 12 Credits
ME50194 Practical instrumentation techniques 6 Credits
ME50208 Power transmission systems 6 Credits

Year 1, Dissertation period

Mandatory units
ME50185 Dissertation 30 Credits

TEME-AFM06: MSc Geometric Modelling and Design

Mode of attendance: Full time


There may be some restrictions on, or alterations to, the availability of optional units (refer to timetable)

Year 1, Semester 1

Mandatory units
ME50167 Computer aids for design 6 Credits
ME50177 Innovation & advanced design 6 Credits
ME50186 Geometric modelling 6 Credits
Optional Units: Select between 0 and 1 Unit(s) from the following list:
ME50158 Global product development 6 Credits
ME50183 Finite element analysis 6 Credits
Optional Units: Select between 0 and 1 Unit(s) from the following list:
ME50190 Systems modelling & simulation 6 Credits
ME50226 Machines and products in society 6 Credits
Optional Units: Select between 0 and 1 Unit(s) from the following list:
ME50170 Manufacturing automation, modelling & simulation 6 Credits

Year 1, Semester 2

Mandatory units
ME50173 Â鶹´«Ã½ methodology 6 Credits
ME50176 Project scoping 12 Credits
ME50205 Reading unit 6 Credits
Optional Units: Select 1 Unit(s) from the following list:
ME50194 Practical instrumentation techniques 6 Credits
ME50208 Power transmission systems 6 Credits

Year 1, Dissertation period

Mandatory units
ME50185 Dissertation 30 Credits

TEME-AFM07: MSc Manufacturing Modelling

Mode of attendance: Full time


There may be some restrictions on, or alterations to, the availability of optional units (refer to timetable)

Year 1, Semester 1

Mandatory units
EG30022 Materials selection in engineering design 6 Credits
ME50170 Manufacturing automation, modelling & simulation 6 Credits
ME50186 Geometric modelling 6 Credits
Optional Units: Select between 0 and 1 Unit(s) from the following list:
ME50158 Global product development 6 Credits
ME50183 Finite element analysis 6 Credits
Optional Units: Select between 0 and 1 Unit(s) from the following list:
ME50159 Manufacturing processes & analysis 6 Credits
ME50167 Computer aids for design 6 Credits

Year 1, Semester 2

Mandatory units
ME50173 Â鶹´«Ã½ methodology 6 Credits
ME50176 Project scoping 12 Credits
ME50194 Practical instrumentation techniques 6 Credits
ME50208 Power transmission systems 6 Credits

Year 1, Dissertation period

Mandatory units
ME50185 Dissertation 30 Credits

TEME-AFM08: MSc Power Transmission and Motion Control Systems

Mode of attendance: Full time


There may be some restrictions on, or alterations to, the availability of optional units (refer to timetable)

Year 1, Semester 1

Mandatory units
ME50145 Introduction to hydraulic circuits & components 6 Credits
ME50147 Component selection for hydraulic systems 6 Credits
ME50201 Electromechanical energy conversion 6 Credits
Optional Units: Select 2 Unit(s) from the following list:
ME50148 Hydraulic systems design 6 Credits
ME50150 Introduction to control for electrohydraulic systems 6 Credits
ME50151 Control systems 6 Credits
MN50170 Fundamentals of accounting and financial management 6 Credits
MN50173 Strategic information systems 6 Credits

Year 1, Semester 2

Mandatory units
ME50176 Project scoping 12 Credits
ME50208 Power transmission systems 6 Credits
Optional Units: Select 2 Unit(s) from the following list:
ME50173 Â鶹´«Ã½ methodology 6 Credits
ME50194 Practical instrumentation techniques 6 Credits
ME50202 Servo-electric drive performance & control 6 Credits

Year 1, Dissertation period

Mandatory units
ME50185 Dissertation 30 Credits

TEME-APC06: PG Cert Fluid Power Systems

Mode of attendance: Part time


There may be some restrictions on, or alterations to, the availability of optional units (refer to timetable)

Year 1, Semester 1

Mandatory units
ME50145 Introduction to hydraulic circuits & components 6 Credits
ME50147 Component selection for hydraulic systems 6 Credits
ME50148 Hydraulic systems design 6 Credits
ME50150 Introduction to control for electrohydraulic systems 6 Credits
     
One ME5 unit to be selected from available units (pending approval) in either S1 or S2:
Optional Units: Select between 0 and 1 Unit(s) from the following list:
ME5XXXX Director of Studies approved unit (s) 6 Credits

Year 1, Semester 2

Optional Units: Select between 0 and 1 Unit(s) from the following list:
ME5XXXX Director of Studies approved unit (s) 6 Credits

TEME-APC12: PG Cert Power Transmission and Motion Control Systems

Mode of attendance: Part time


There may be some restrictions on, or alterations to, the availability of optional units (refer to timetable)

Year 1, Semester 1

Mandatory units
ME50145 Introduction to hydraulic circuits & components 6 Credits
ME50147 Component selection for hydraulic systems 6 Credits
ME50201 Electromechanical energy conversion 6 Credits
     

One ME5 unit to be selected from available units (pending approval) in either S1 or S2:

 
Optional Units: Select between 0 and 1 Unit(s) from the following list:
ME5XXXX Director of Studies approved unit (s) 6 Credits

Year 1, Semester 2
Mandatory units
ME50208 Power transmission systems 6 Credits
Optional Units: Select between 0 and 1 Unit(s) from the following list:
ME5XXXX Director of Studies approved unit (s) 6 Credits

TEME-APL04: PG Dip Power Transmission and Motion Control Systems

Mode of attendance: Part time


There may be some restrictions on, or alterations to, the availability of optional units (refer to timetable)

Students must take units totalling 24-30 credits in year 1 (with a total of 60 credits for the programme)

Year 1, Semester 1

Mandatory units
ME50145 Introduction to hydraulic circuits & components 6 Credits
ME50201 Electromechanical energy conversion 6 Credits
Optional Units: Select between 0 and 1 Unit(s) from the following list (this unit is mandatory & must be selected in either year 1 or year 2):
ME50147 Component selection for hydraulic systems 6 Credits
Optional Units: Select between 0 and 2 Unit(s) from the following list:
ME50148 Hydraulic systems design 6 Credits
ME50150 Introduction to control for electrohydraulic systems 6 Credits
ME50151 Control systems 6 Credits
MN50170 Accounting & finance 6 Credits
MN50173 Strategic information systems 6 Credits

Year 1, Semester 2

Mandatory units
ME50208 Power transmission systems 6 Credits
Optional Units: Select between 0 and 2 Unit(s) from the following list:
ME50173 Â鶹´«Ã½ methodology 6 Credits
ME50194 Practical instrumentation techniques 6 Credits
ME50202 Servo-electric drive performance & control 6 Credits

Year 2, Semester 1

Optional Units: Select between 0 and 1 Unit(s) from the following list (this unit must be selected if not already taken in year 1):
ME50147 Component selection for hydraulic systems 6 Credits
Optional Units: Select between 0 and 2 Unit(s) from the following list:
ME50148 Hydraulic systems design 6 Credits
ME50150 Introduction to control for electrohydraulic systems 6 Credits
ME50151 Control systems 6 Credits
MN50170 Accounting & finance 6 Credits
MN50173 Strategic information systems 6 Credits

Year 2, Semester 2

Mandatory units
ME50216 Diploma project 12 Credits
Optional Units: Select between 0 and 2 Unit(s) from the following list:
ME50173 Â鶹´«Ã½ methodology 6 Credits
ME50194 Practical instrumentation techniques 6 Credits
ME50202 Servo-electric drive performance & control 6 Credits

TEME-APL05: PG Dip Fluid Power Systems

Mode of attendance: Part time


There may be some restrictions on, or alterations to, the availability of optional units (refer to timetable)

Students must take units totalling 24-30 credits in year 1 (with a total of 60 credits for the programme)

Year 1, Semester 1

Mandatory units
ME50145 Introduction to hydraulic circuits & components 6 Credits
ME50147 Component selection for hydraulic systems 6 Credits
Optional Units: Select between 0 and 3 Unit(s) from the following list (these units are mandatory, & must be selected in either year 1 or year 2):
ME50148 Hydraulic systems design 6 Credits
ME50150 Introduction to control for electrohydraulic systems 6 Credits
ME50151 Control systems 6 Credits

Year 1, Semester 2

Optional Units: Select between 0 and 3 Unit(s) from the following list (these units are mandatory, & must be selected in either year 1 or year 2):
ME50173 Â鶹´«Ã½ methodology 6 Credits
ME50194 Practical instrumentation techniques 6 Credits
ME50208 Power transmission systems 6 Credits

Year 2, Semester 1

Optional Units: Select between 0 and 3 Unit(s) from the following list (select those units not already taken in year 1):
ME50148 Hydraulic systems design 6 Credits
ME50150 Introduction to control for electrohydraulic systems 6 Credits
ME50151 Control systems 6 Credits

Year 2, Semester 2

Mandatory units
ME50216 Diploma project 12 Credits
Optional Units: Select between 0 and 3 Unit(s) from the following list (select those units not already taken in year 1):
ME50173 Â鶹´«Ã½ methodology 6 Credits
ME50194 Practical instrumentation techniques 6 Credits
ME50208 Power transmission systems 6 Credits

TEME-APM01: MSc Fluid Power Systems

Mode of attendance: Part time


There may be some restrictions on, or alterations to, the availability of optional units (refer to timetable)

Students must take units totalling 24-30 credits in year 1 (with a total of 90 credits for the programme)

Year 1, Semester 1

Mandatory units
ME50145 Introduction to hydraulic circuits & components 6 Credits
ME50147 Component selection for hydraulic systems 6 Credits
Optional Units: Select between 0 and 3 Unit(s) from the following list (these units are mandatory, & must be selected in either year 1 or year 2):
ME50148 Hydraulic systems design 6 Credits
ME50150 Introduction to control for electrohydraulic systems 6 Credits
ME50151 Control systems 6 Credits

Year 1, Semester 2

Optional Units: Select between 0 and 3 Unit(s) from the following list (these units are mandatory, & must be selected in either year 1 or year 2):
ME50173 Â鶹´«Ã½ methodology 6 Credits
ME50194 Practical instrumentation techniques 6 Credits
ME50208 Power transmission systems 6 Credits

Year 2, Semester 1

Optional Units: Select between 0 and 3 Unit(s) from the following list (select those units not already taken in year 1):
ME50148 Hydraulic systems design 6 Credits
ME50150 Introduction to control for electrohydraulic systems 6 Credits
ME50151 Control systems 6 Credits

Year 2, Semester 2

Mandatory units
ME50176 Project scoping 12 Credits
Optional Units: Select between 0 and 3 Unit(s) from the following list (select those units not already taken in year 1):
ME50173 Â鶹´«Ã½ methodology 6 Credits
ME50194 Practical instrumentation techniques 6 Credits
ME50208 Power transmission systems 6 Credits

Year 3, Academic year

Mandatory units
ME50185 Dissertation 30 Credits

TEME-APM02: MSc Dynamics and Control

Mode of attendance: Part time


There may be some restrictions on, or alterations to, the availability of optional units (refer to timetable)

Students must take units totalling 24-30 credits in year 1 (with a total of 90 credits for the programme)

Year 1, Semester 1

Mandatory units
ME50151 Control systems 6 Credits
ME50155 Mechanical vibrations & noise 6 Credits
Optional Units: Select between 0 and 1 Unit(s) from the following list (this unit is mandatory & must be selected in either year 1 or year 2):
ME50190 Systems modelling & simulation 6 Credits
Optional Units: Select between 0 and 3 Unit(s) from the following list :
ME50152 Structural mechanics 6 Credits
ME50181 Computational fluid dynamics 6 Credits
ME50183 Finite element analysis 6 Credits
ME50193 Vehicle dynamics 6 Credits

Year 1, Semester 2

Optional Units: Select between 0 and 3 Unit(s) from the following list (these units are mandatory & must be selected in either year 1 or year 2):
ME50173 Â鶹´«Ã½ methodology 6 Credits
ME50194 Practical instrumentation techniques 6 Credits
ME50208 Power transmission systems 6 Credits

Year 2, Semester 1

Optional Units: Select between 0 and 1 Unit(s) from the following list (this unit must be selected if not already taken in year 1):
ME50190 Systems modelling & simulation 6 Credits
Optional Units: Select between 0 and 3 Unit(s) from the following list:
ME50152 Structural mechanics 6 Credits
ME50178 Advanced control 6 Credits
ME50181 Computational fluid dynamics 6 Credits
ME50183 Finite element analysis 6 Credits
ME50193 Vehicle dynamics 6 Credits

Year 2, Semester 2

Mandatory units
ME50176 Project scoping 12 Credits
Optional Units: Select between 0 and 3 Unit(s) from the following list (select those units not already taken in year 1):
ME50173 Â鶹´«Ã½ methodology 6 Credits
ME50194 Practical instrumentation techniques 6 Credits
ME50208 Power transmission systems 6 Credits

Year 3, Academic year

Mandatory units
ME50185 Dissertation 30 Credits

TEME-APM03: MSc Power Transmission and Motion Control Systems

Mode of attendance: Part time


There may be some restrictions on, or alterations to, the availability of optional units (refer to timetable)

Students must take units totalling 24-30 credits in year 1 (with a total of 90 credits for the programme)

Year 1, Semester 1

Mandatory units
ME50145 Introduction to hydraulic circuits & components 6 Credits
ME50201 Electromechanical energy conversion 6 Credits
Optional Units: Select between 0 and 1 Unit(s) from the following list (this unit is mandatory & must be selected in either year 1 or year 2):
ME50147 Component selection for hydraulic systems 6 Credits
Optional Units: Select between 0 and 2 Unit(s) from the following list:
ME50148 Hydraulic systems design 6 Credits
ME50150 Introduction to control for electrohydraulic systems 6 Credits
ME50151 Control systems 6 Credits
MN50170 Accounting & finance 6 Credits
MN50173 Strategic information systems 6 Credits

Year 1, Semester 2

Mandatory units
ME50208 Power transmission systems 6 Credits
Optional Units: Select between 0 and 2 Unit(s) from the following list:
ME50173 Â鶹´«Ã½ methodology 6 Credits
ME50194 Practical instrumentation techniques 6 Credits
ME50202 Servo-electric drive performance & control 6 Credits

Year 2, Semester 1

Optional Units: Select between 0 and 1 Unit(s) from the following list (this unit must be selected if not already taken in year 1):
ME50147 Component selection for hydraulic systems 6 Credits
Optional Units: Select between 0 and 2 Unit(s) from the following list:
ME50148 Hydraulic systems design 6 Credits
ME50150 Introduction to control for electrohydraulic systems 6 Credits
ME50151 Control systems 6 Credits
MN50170 Accounting & finance 6 Credits
MN50173 Strategic information systems 6 Credits

Year 2, Semester 2

Mandatory units
ME50176 Project scoping 12 Credits
Optional Units: Select between 0 and 2 Unit(s) from the following list:
ME50173 Â鶹´«Ã½ methodology 6 Credits
ME50194 Practical instrumentation techniques 6 Credits
ME50202 Servo-electric drive performance & control 6 Credits

Year 3, Academic year

Mandatory units
ME50185 Dissertation 30 Credits

 

| Catalogues for 2003/04 | PG index for 2003/04

Student Records & Examinations Office, Â鶹´«Ã½, Bath BA2 7AY
Tel: +44 (0) 1225 384352 Fax: +44 (0) 1225 386366
To request a copy of this information (Prospectus): To report a problem with the catalogue click here

This page maintained by H.E.Buick@bath.ac.uk. Last update: 5 May, 2004

©2003 Â鶹´«Ã½ · ·